AFM Probe Manufacturers

Introduction

This article contains a list of all the software freely available to manipulate data from Scanning Probe Microscopy (SPM), that is, Atomic Force Microscopy (AFM), and Scanning Tunnelling Microscopy (STM). It does not include software designed only to load one particular format, i.e. the software provided by the instrument manufacturers, unless they are able to open other formats. It is intended to summarise the third party software available. It does not compare the quality of the software, and the order is entirely arbitrary. If you know of other software available, let me know.  I do know of one other existing list of SPM software[This one], although I dont think it's being updated.

 This list is an updated version of that which appeared in my book:"Atomic Force Microscopy", OUP, 2010, with Paul West.

List of Third Party SPM Software

Gwyddion

Freely available, open source software for manipulation of SPM files; supports very many formats, contains many analysis tools. Available for Linux, Windows and MAC OS. Frequently updated. Available here. (http://www.gwyddion.net)

MountainsSPIP

This package loads all of the major formats of SPM files. It is very complete, and produces nice data analysis, including an unusual "report" format of data analysis. Commercial software, but a downloadable demo version is available. Recently merged with SPIP, which was itself extremely popular, into MountainsSPIP 8. DigitalSurf's "Mountains" package also analyses profiler and SEM data.
More details here. (https://www.digitalsurf.com/software-solutions/scanning-probe-microscopy/)

TopoStats

TopoStats is Python package that is designed to batch process AFM images (topography), and extract statisitical information. Can do automated DNA contour tracing. Documentation is here and source code is here.

You need a Python environment to run it.

Software for AFM & SPM data analysis

A community hub for Atomic Force Microscopy and Scanning Probe Microscopy analysis code. Has a few different programs availble, source code only, rather than standalaone packages as far as I can tell. Maintained, or at leat setup, by the AFM and SPM section of the RMS.

WSxM - Appears to be no longer available

Freely available software that supports many SPM file formats; and has many analysis tools. I personally like the 3D rendering results from WSxM a lot. It was originally developed by an AFM manufacturer for use with their instrument, but later became completely independent and supports very many other file formats. Unlike many third party programs, has support for force curves as well. Was frequently updated and available here. (http://www.wsxm.es/) - This link is now dead, if anyone knows of a current website, please let me know.

FemtoScan Online

Commercial software from a manufacturer, but loads lots of (about 20) other formats. 30-days trial has no functional limitations. English and Russian user interface. It seems to be quite capable software, if a little cryptic. Available here. (http://www.nanoscopy.net/en/Femtoscan-D.php)

PyJibe

This is a nice-looking package for manipulaiton of NanoWizard force-distance data including force maps. Free to use, and available here. (https://github.com/AFM-analysis/PyJibe)

PUNIAS (Protein Unfolding and Nanoindenation Analysis Software)

Commercial software, dedicated to analysis of force curves, supports several formats. Implements several of the common analysis techniques used for force spectroscopy, and nanoindentation data. Also supports force volume images. A licence must now be purchased to use it. Available here.  (http://punias.free.fr/)

AtomicJ

Freely available, open-source software, with versions for Windows, Mac and Linux. Like PUNIAs, this software concentrates on batch processing of force curves. Opens a small number of common file formats. Seems quite complete, and delivers thoroughly summarised results. Available here, and described in this paper.

Image SXM

A version of NIH Image that has been extended to handle the loading, display and analysis of scanning microscope images. Seems to be able to open lots of file formats, but only works on MAC, so I've never tried it. Available here. (http://www.liv.ac.uk/~sdb/ImageSXM/)

ImageJ

Cross-platform image analysis program, not specifically designed for SPM images, but there are plugins to load MI or Nanoscope files here. Not very geared towards SPM data, but some people use it, and it does have some useful functions, for e.g. particle counting. Available here. (http://rsb.info.nih.gov/ij/)

GXSM

This is a cross-platform (Linux, with a Windows port) open-source package that not only analyses data, but runs hardware, too. I haven't tried it. More details here.

 TrueMap and TrueSurf

True Map is an analysis and display program. TrueSurf is a surface roughness analysis program. These are extensions of profiler software packages, now offering some AFM format support. Commercial software, a licence must be bought for extended use. More details here. (http://www.truegage.com)

OpenFovea

OpenFovea is a program for analysis of force-volume files, i.e. AFM files containing spatially-resolved force curves. It is a Linux-native program with a Windows version also available. I have not tried this software. More details here. (http://www.freesbi.ch/en/openfovea)

Pycroscopy

A package that aims to allow analysis of data from a very wide range of different microscopy methods including AFM / SPM. The program is available as a package for the Python programming language, meaning it's necesssary to install a verison of Python before you can use it. More details here: (https://pycroscopy.github.io/pycroscopy/about.html)

Software that's no longer maintained

SPIP (Scanning Probe Image Processor)

 Recently discontinued commercial software for manipulation of SPM files; supports very many formats, contains many analysis tools. Also allows analysis of force curves in several formats. Has a purchase price, but a time-limited demonstration version is available. Frequently updated. Following acquisition of imagemet by digital surf, SPIP has been merged with the MountainsMap package and now it's called MountainsSPIP.

 SPM Image Magic

Details

Published: 13 July 2009

Hits: 101881

AFM Manufacturer list

The following is a simple alphabetical list of, hopefully, all the AFM manufacturers in the world. If you have any additions to make, get in touch via the contact form. For AFM probes, look at the SPM Probes list, and for reference samples, see the SPM References list. Note: I have moved the companies that are no longer separate businesses to a new list, below.

Details

Published: 15 June 2012

Hits: 88593

Read more: Where to Buy: AFM Instruments

Does an AFM need to be have a technician responsible for it?  Or a senior scientist who can train others to use it? In many research labs, the answer seems to be “no”. Or at least, there is no-one fully responsible for the AFM, who can advise on experiment design, sample preparation, and train users, or even just run users’ samples. In this blog post, I’ll talk about why this situation exists, and what should be done about it.  

In research labs in academia, (and, to a lesser extent, also in industry), there are often two kinds of facilities, those that are operated by individual researchers, in their own projects, and those that are run either ONLY by technicians /senior scientists, or only by fully qualified researchers under the close supervision of an expert. For example, in chemistry, a common instrument that is usually left to researchers (such as students) to run by themselves, is a UV/visible spectrometer. This is a pretty simple instrument, that is kind of a “black box”, which requires minimal training to use correctly.This is not to say that some things cannot go wrong, but an occasional prod in the right direction is all that’s required. Typically, if any-one is responsible for the instrument, they often just change the bulb now and again. More complex instruments are often run the same way, up to optical microscopes. But this is not the same for nanometre-resolution microscope, right?

Electron microscopes are *rarely* solely user-operated. They nearly always have a technician responsible, who might be the only one to use the microscope at all. When I began to use electron microscopes, it was clear that I was not going to get my hands on the instrument, until after a very thorough training lasting several weeks, and costing a lot of money. After this, I used the instrument for a long period of supervised operation, before finally being considered independent. This makes sense, for several reasons:

• Electron microscopes are complex, with many controls you need to learn

• They are easy to misalign, or even damage

• They usually need careful sample preparation

• The data from them can need careful interpretation

• Electron microscopes are (usually) big and expensive instruments

So, what about the AFM? Doesn’t all this hold true for an AFM?

Surprisingly, there are many many cases where AFM instruments do not have a responsible user, let alone a technician. In the AFM training course I teach, something like 50% of the people who need training say there’s an AFM in the lab and no-one knows how to use it.

There are many AFM instruments sitting in lab corners, barely if ever used, or used only by un-trained students.

So, why is this? All those bullets points up there kinda hold true for AFM, don’t they? I think they mostly do, but I think the difference is in the last part.

An AFM can be a low-cost instrument! And an AFM might be very small indeed...which will often lead to the erroneous idea that it’s a simple instrument to use. Is AFM more difficult than electron microscopy? I don’t think so, but most electron microscopists seem to think so. Then again, perhaps this is because they’ve never been trained properly in use of an AFM.

Let’s look at cost; here’s a rough idea of what it costs to get an instrument with 1 nm resolution:  

NOTE: These are “typical purchase costs”, and any of them might costs more or less than this, but not by an order of magnitude….

Now, these 3 instruments would not be the same, and I am not saying a 40,000 dollar AFM can do everything a million dollar electron microscope can do, but with these three instruments, you can achieve around 1 nm resolution. To explain what you can really do with them could make another looong blog post...

But, wow, it’s a big difference, isn’t it? Add to this the fact that a TEM takes up an entire room to itself, and may even need the ceilings raised to fit in (and it usually won’t fit through your door, either!), and you can start to see why sometimes people take the TEM or SEM more “seriously”...If you have to raise a million dollars in funding to buy a microscope, you are going to make damn well sure that a: It’s not broken by incompetent users, and b), that you get some money back to keep it going by selling services.

So there we have our poor little AFM, it’s the new kid on the block, electron microscopists don’t understand it, and no-one ever gets properly trained. Some AFMs are actually installed by technicians who don’t know how to used it.

So what can you do?

• TRAIN your USERS!

• MAINTAIN the KNOWLEDGE!

• keep GOOD staff!

All of these are difficult, but check out our training courses here: http://afmhelp.com/course

I would be interested to hear what other people think about this, it’s something I’ve been telling people a long time, and no-one has contradicted me (audibly) yet! Do people out there who can use  AFMs and EMs think one is more difficult than the other? Modern electron microscopes are also highly automated, partially due to more mature technology, and partly, I guess, to justify their high costs!

Details

Published: 09 June 2017

Hits: 11380

A very kind mention of our book has been made on the blog from the people at NuNano. This was in an article entitled "12 Brilliant Books on Atomic Force Microscopy". The post is well worth a read, as it covers a lot of the best general texts out there, and some of the more specialised ones as well. Nunano have also been doing quote a lot to create better community around AFM, and their blog is a must-read for me. There is alot of very useful material on their website for the AFM User. Thanks a lot for the kind words, guys! 

"This classic text was the starting point from which the website afmhelp.com emerged, run and regularly updated by author Peter Eaton, with the explicit objective to contain all the AFM related material they couldn’t fit into the book! There’s a lot of love for the website from the AFM Community and wholesale agreement that the book behind it is a must-have too."

Details

Published: 30 July 2023

Hits: 6525